Epson MovieMate 30s Quick Manual page 23

Lights
The transmitter's
P
solid green and the BATT light
is solid red
The receiver's P light is solid
green, the LINK light is solid
green, and the STEREO light is
solid green
The receiver's P light is solid
green, the LINK light is solid
green, and the SURROUND
light is solid green
The receiver's P light is solid
green, the LINK light is solid
green, and the SURROUND
and STEREO lights are off
Explanation
light is The transmitter's batteries are low on power.
When the light first turns on you have
approximately four to five hours of battery life
left. See page 7 to replace the batteries.
The BATT light is calibrated for alkaline batteries.
If you are using rechargeable batteries to power
the transmitter, the BATT light may turn on
prematurely.
The receiver is receiving a stereo signal from the
transmitter.
The receiver is receiving a surround signal from
the transmitter.
The receiver is not receiving an audio signal from
the transmitter. Make sure that the audio cable is
connected correctly as described on page 9.
Wireless Audio Set Status Lights
23