Configuring Your Epson Moviemate - Epson MovieMate 30s Quick Manual

Configuring Your Epson MovieMate

1. Turn on your Epson MovieMate.
2. Press the
Setup
3. Press the button to highlight
4. Press the
press the
Enter
5. Press the
connection you used to connect the receiver to your audio system from the
table below, then press the
Connection
Optical
Coaxial
RCA
Speaker wire
6. Press to highlight
7. Select the setting that matches the type of connection you used to connect the
receiver to your audio system from the table below, then press the
button.
Connection
Optical
Coaxial
RCA
Speaker wire
8. When you have finished selecting settings, press the
the menu system.
You're finished setting up the Wireless Audio Set. See "Using the Wireless Audio
Set" on page 19.
button on the remote control.
or button to highlight
button.
or button to select the setting that matches the type of
Enter
DOWN MIX
and display the
DIGITAL AUDIO OUTPUT
button.
Setting
STREAM/PCM
STREAM/PCM
PCM ONLY
PCM ONLY
, then press the
Setting
DOLBY SURROUND
DOLBY SURROUND
STEREO
STEREO
Configuring Your Epson MovieMate
setup menu.
AUDIO
button.
Enter
button to exit
Setup
, then
Enter
17