Configuring Your Dvd Player - Epson MovieMate 30s Quick Manual

Configuring Your DVD Player

Some DVD players may require you to go into a setup or configuration menu to
activate the optical or coaxial audio port and select audio setting for it. Refer to the
documentation for your DVD player to select the setting that matches the type of
connection you used to connect the receiver to your audio system from the table
below.
Connection
Optical
Coaxial
RCA
Speaker wire
Note:
Your DVD player's settings may differ from the ones shown above. Refer to the
documentation for your DVD player to select an equivalent setting.
You're finished setting up the Wireless Audio Set. See "Using the Wireless Audio
Set" on page 19.
18
Setting Up
Setting
SPDIF/DOLBY/DTS
SPDIF/DOLBY/DTS
PCM or STEREO
PCM or STEREO