Epson MovieMate 30s Quick Manual page 15

2. Connect the audio cable to the receiver, then connect the other end to your
audio system as shown below.
Audio system
Note:
Use only one audio cable to connect the receiver to your audio system.
Make sure that you configure your audio system to use the input source you connected
the receiver to.
When you're finished connecting the audio cable, do one of the following:
■
If you connected the transmitter to an Epson MovieMate, see page 17.
■
If you connected the transmitter to a DVD player, see page 18.
Optical audio cable
Coaxial
audio cable
Optical Coaxial
CD/DVD
Connecting the Audio Set Receiver
RCA cable
(stereo)
Receiver
15