LG 26LH1DC1 Installation And Operating Manual page 75

® Try a different LT2002 Clone programmer.
® Reset Clone Programmer.
÷ Retry cloning again.
Master and Other 26LH1 DC1
÷ Cloning is only possible with identical model TVs.
@ Reread 57 - 58 - 59 pages to be sure all tasks were performed,
@ Redo cloning and be sure learning/teaching time is about 1 min, and 5 to15 seconds (75 seconds),
m
z
X
® Batteries must remain installed to retain time settings.
® Disconnect newly cloned unit from power for 5 seconds.
• After cloning operations are complete, just unplug the LT2002 from the 26LH1DC1.
• If the 26LH 1DC1 does not display a picture on the TV (blank screen) after a few seconds, just change channels.
75