LG 26LH1DC1 Installation And Operating Manual page 64

COMMERCIAL MODE
INSTALLERMENU
N
0
I'rl
N
J
>
r--
0
I'rl
Detailed Descriptions of Installer Menu Items
030 - ACK MASK
M.RI. Communication Parameter. Leave at default setting
unless changed by Pay-Per-View provider. When set to 1,
changes M.RI. for some OCV boxes.
051 - POLL RATE
M.RI. Communication Parameter. Selects Poll Rate for
M.RI. Leave at default setting unless changed by
Pay-Per-View provider. Step size of 16 ms.
052 - TIMING PULSE
M.RI. Communication Parameter. Leave at default setting
unless changed by Pay-Per-View provider. Sets baud rate.
Step size of 4.3; uS.
054 - CAMPORT EN. (Camera Port Enable)
Set to 1 to enable Video 2 input on display panel. If set
to 0, Video 2 input on display panel is not functional.
055 - COMPORT EN. (Computer Port Enable)
Enable/disables display panel HDMI input jack. Set to 0
to disable, set to 1 to enable.
038 - YPrPb EN. (Rear Component Video Enable)
Set to 1 to enable display panel rear Component Video
1 input.
Set to 0 to disable display panel rear Component Video
1 input.
039 - REAR AUX EN. (Rear Aux Enable)
Set to 1 to enable display panel rear AUX (Video 1)
input.
Set to 0 to disable display panel rear AUX (Video 1)
input.
040 - AUTO CAMPORT
Set to 1 to automatically switch to Camport when
equipment is connected to front Video input.
Set to 0 to disable front Video automatic source
selection.
046 - STRT AUX SRCE (Start Aux Source)
Sets the starting AUX source.
Start source if start channel =0
1 = Video1 4 = RGB1 7 = Video 3 / S-Video
2 = Video2 5 = Component 2 255 = Last Aux
3 = HDMI 1 6 = Component 1
047 - AUX STATUS
Set to 1 for M.RI. AUX source to be reported as a
channel number instead of channel O. Set to 0 to
disable AUX identification change.Controls M.RI. status
channel response for AUX inputs.
055 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the Channel-Time display,
Channel-Time display will not appear.
Set to 0 to enable the Channel-Time display.
069 - EN. CH-T COL. (Enable Channel-Time Custom
Color)
Set to 1 to enable custom color for the Channel-Time
display.
Set to 0 to disable custom color for the Channel-Time
display.
070 - FOR. CH-TIME (Channel-Time Display
Foreground Color)
Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
*Note: If foreground and background colors are the same, menu
background is transparent.
O71 - BCK. CH-TIME (Channel-Time Display
Background Color)
Set according to Color Chart.
0 = Black 3 = Yellow 6 = Cyan
1 = Red 4 = Blue 7 = White
2 = Green 5 = Violet
*Note: If foreground and background colors are the same, menu
background is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNEL OVERRIDE is set to
0, "NOT AVAILABLE" message is displayed when
directly accessing a channel not in the channel scan list
available in memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.RI. communication occurs, TV
automatically tunes to the specified Start Channel.
077 - QUICK SHUTOFF
Allows TV power off to be controlled by the pillow
speaker channel selection button. User would press and
hold button down for time required to have TV turn off.
Value Range 0 - 1Z each number represents 1/2 second.
For example, if set to 4, TV would turn off if user held
speaker channel button down for 2 seconds.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte
readable by M.RI. command. Note: Not linked to serial
number.
(Continued on next page)
64