Download Print this page

Advertisement

26LH1DC1
Please
read this
manual
carefully
before
operating
your
set.
Retain
it for
future
reference.
Record
model
number
and
serial
number
of the
set.
See the
label
attached
on the
back
cover
and
quote
this
information
to your
dealer
when
you
require
service.

Advertisement

Troubleshooting

   Related Manuals for LG 26LH1DC1

   Summary of Contents for LG 26LH1DC1

  • Page 1

    26LH1DC1 Please read this manual carefully before operating your set. Retain it for future reference. Record model number serial number of the set. See the label attached on the back cover quote this information to your dealer when require service.

  • Page 2: Warning / Caution

    NETWORK / TELEPHONE. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE (LG Electronics U.S.A., Inc.,) (2000 Millbrook Drive) (TELEPHONE NO:I-847-941 -8000)

  • Page 3

    Apparatus shall not be exposed to dripping or without written authorization from LG Electronics splashing and no objects filled with liquids, such as Corporation. vases, shall not be placed on the apparatus. Unauthorized modification could void the user's authority to operate this product.

  • Page 4: Safety Instructions

    SAFETY [NST IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. Do not block any ventilation openings.

  • Page 5: Table Of Contents

    CONTENTS WARNING / CAUTION ......SAFETY INSTRUCTIONS ......Caption / Text .......... CONTENTS ..........Preset Sound Settings ......Sound Setting Adjustment-user Mode ..43 Sound Balance Setup ......Digital Audio Output Settings ..... Accessories ..........Aautomatic Volume Control Settings ..4S Front Panel Information .......

  • Page 6: Accessories

    LT2002 Quickset II Clone Programmer - both are shown and described in later sections. See your LG dealer if you wish to purchase the Installer remote and LT2002. The installer remote allows access to the Installer menus, User menus, and Channel Banks in the Manual Channel Set options on the Setup menu.

  • Page 7: Front Panelinformation

    FRONT PANELINFORMATION Here shown may be somewhat different from your Using the front control panel to operate the TV. Front Panel Controls Power / Standby Indicator Glows red in Standby mode. Glows green when the TV is turned on. Glows orange in Sleep Timer and/or Alarm mode.

  • Page 8: Back Panelinformation

    PREPARATION BACK PANELINFORMATION Here shown somewhat different from your Back Connection Panel © --AUDIO / VIDEO Connect Audio / Video equipment to these jacks. SPEAKER SWITCH Used to select the speaker output switch. *Nole: If Pillow Speaker is selected, no Sound will be heard from TV speakers.

  • Page 9: Vesa Wall Mounting

    VESA WALL MOUNTING Here shown may be somewhat different from your TV. Following are shown some examples of VESA standard 200ram mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will be used to mount the TV.

  • Page 10: Antenna Or Cable Connection

    EXTERNAL EQUIPMENT SETUP ANTENNA OR CABLE CONNECTION Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna Socket Outdo RF Coaxial Wire (7S ohm)

  • Page 11: Hd Receiversetup

    To prevent the equipment damage, never plug in any power cords until you have finished connecting equipment. HD RECEIVERSETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. Howeven if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

  • Page 12

    EXTERNALEQUIPMENT SETUP When connecting HDMi cable 1. How to connect Connect the digital set-top box to HDMI/DVI IN jack on the set. "O No separated audio connection is necessary. HDMI supports both audio and video. "O 2. How to use Turn on the digital set-top box.

  • Page 13

    When connecting HDMI to DV! cabme 1. How to connect Connect the DVI output of the digital set-top box to the £3 HDMI/DVI IN jack on the set. Connect the audio output of the digital set-top box to the DVI/PC AUDIO IN jack on the set.

  • Page 14: Dvd Setup

    EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT(DVD/DTV)I jacks on the set. Match the jack colors (¥ = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the COMPONENT(DVD/DTV)I...

  • Page 15

    When connecting with an S-Video cabme 1. How to connect Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. Connect the audio outputs of the VCR to the AUDIO input jacks on the set. When connecting HDMI cable 1.

  • Page 16: Vcr Setup

    EXTERNALEQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures...

  • Page 17

    When connecting with a RCA cable 1. How to connect Connect theVlDEO1 jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use Insert a video tape into the VCR and press PLAY on the VCR.

  • Page 18: Other A/v Source Setup

    EXTERNALEQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect ex) TV Model Connect the VIDEO2 jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, Audio Right = red) Video Game How to use Select AV2 input source by using the 1 -3-0 Camcorder...

  • Page 19: Pc Setup

    PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable r'rl 1. How to connect Connect the RGB output of the PC to the PC IN jack on the set.

  • Page 20

    EXTERNALEQUIPMENT SETUP Supported Display Specifications RGB-PC, HDMI1/DVI-PC mode HDMI1/DVI-DTV, HDMI2-DTV mode 31.469 70.08 31.469 59.94 31.500 60.00 31.469 70.08 44.960 59.94 31.469 59.94 45.000 60.00 37.879 60.31 33.720 59.94 33.750 60.00 48.363 60.00 47.776 59.87 47.720 59.799 iiiiii 47.130 59.65...

  • Page 21: Screensetup For Pc Mode

    SCREENSETUP FOR PC MODE Overview When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. When HDMI/DVl connect to PC output and select HDMI/DVl input, this function is used. After connecting RGB-PC or HDMI/DVl to PC input and...

  • Page 22: Pillow Speakersetup

    Controlling the TV with Serial Data The TV is capable of being controlled by a single-wire, serial data signal. This is a LG patented technology and is being implemented by certain brands of "smart" pillow speakers, such as Curbell's "GEN-II" models.

  • Page 23: User Remote Control Button Functions

    TV / CHANNEL CON USER REMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional patient remote control and what they POWER Turns TV On or Off. GUIDE Turns sound Off and On, while the picture MUTE remains.

  • Page 24: Installerremote Control Button Functions

    WATCHING TV/CHANNEL CONTROL INSTALLERREMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional installer's remote and what they POWER Turns TV On or Off. MUTE GUIDE Turns sound Off and On, while the picture remains. Use to view DTV program information. CC (Closed Captioning) BANK Press to access closed captions.

  • Page 25: On-screen Menus Selection

    ON-SCREEN MENUS SELECTION Use the remote keys indicated below to access these menus and displays. In this manual, the OSD (On Screen Displays shown) may be different. The following are just generic examples to familiarize you with the TVs options. Volume Display Sleep Timer Menu SAP Display...

  • Page 26: Channel Search

    WATCHING TV/CHANNEL CONTROL CHANNEL SEARCH Auto Program (Channel Search) Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band. "l- With the optional Installer remote control in hand and press the POWER button to turn the TV on.

  • Page 27

    Channel List After the channel search, remove unwanted channels. "l- Press the MENU button and then use the ADJ • or • button to highlight the Channel menu and press the (Enter) button. Use the ADJ • or • button to highlight Channel List r"""...

  • Page 28

    WATCHING TV/CHANNEL CONTROL Channel Labels Setup Channel Labels help the user identify the channel or network being viewed. In the Setup menu with the Channel Labels option highlighted, use the ADJ A Y @ I_ buttons to scroll through available channel labels_ such as, A&E, AMC, ESPN_HBO, etc. These are a series of preset labels from which you can choose the more common networks.

  • Page 29

    Unstable Screen If a dashed line or no color appears, the screen is unstable, therefore try channel adjustments. (This is only available for analog broadcasting.) Press the MENU button and then use the ADJ • or • button to highlight the Channel menu and press the "l- (Enter)

  • Page 30: Clock Setting

    TIME SETTING CLOCK SETTING Manual Time Settings Use the ADJ • • • I_ buttons to set the year, month, day, hours and minutes. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 31

    Automatic Time Settings If you select auto time setting, time will be set from the digital broadcast information. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 32: Daylight Saving

    TIME SETTING Daylight Saving Installer can select to use Daylight Savings to adjust the clock time. This is operated from the Automatic Time Settings. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 33: Tv Activation Settings

    TV Activation Time Settings You can set a time for the TV to automatically turn-on. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button. Use the ADJ •...

  • Page 34: Auto Off

    TIME SETTING Auto Off If there is no signal on the TV for 15 minutes or more, or if no button is pressed for more than 3 hours, this function turns off the TV automatically. Press the MENU button and then use the ADJ • or •...

  • Page 35: Set Password& Lock System

    PARENTALCONTROL/RATINGS SET PASSWORD& LOCK SYSTEM Entering a PIN (Password) This option sets up or changes the password for blocking program ratings. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 36

    PARENTALCONTROL/RATINGS Set Block Hour. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button. © Use the ADJ • or • button to highlight V-Chip press the OK[ (Enter) button.

  • Page 37: Movie& Tv Ratings

    MOVIE& TV RATINGS TVPG Ratings You can block programs based on the TV program rating. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button. Use the ADJ •...

  • Page 38

    PARENTALCONTROL/RATINGS MPAA Ratings Restricting movies by their rating. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button. © Use the ADJ • or • button to highlight V-Chip press the OK (Enter) button.

  • Page 39

    Canadian English Ratings Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the 0 K (Enter) button. Use the ADJ • or • button to highlight V-Chip press the OK (Enter) button.

  • Page 40

    PARENTALCONTROL/RATINGS Lock menu-Downloadable Rating in the CD manual is added by the information presented here. Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Downloadable Rating Press the MENU button and then use the ADJ • or •...

  • Page 41: Caption / Text

    SOUND & CAPTION / TEXT On/Off Turn Captions Press the MENU button and then use the ADJ • or • button to highlight the Caption menu and press the (Enter) button. Use the ADJ • or • button to highlight On/Off press the OK (Enter) button.

  • Page 42

    SOUND & LANGUAGE CONTROL Digital Captions Mode Digital Captions only appear on digital channels, tune in a digi-tal channel that is actually broadcasting digital captions. Press the MENU button and then use the ADJ • or • button to highlight the Caption menu and press the (Enter) button.

  • Page 43: Preset Sound Settings

    Preset Sound Settings Match the sound mode to the program's character, Music, Movie, Sports, or News. (This is Feature operates only in DTV mode.) Press the MENU button and then use the ADJ • or • button to highlight the Sound menu and press the OK (Enter) button.

  • Page 44: Sound Balance Setup

    SOUND & LANGUAGE CONTROL Sound Balance Setup Adjust the speaker balance for optimum sound quality. Press the MENU button and then use the ADJ • or • button to highlight the Sound menu and press the O K (Enter) button. Use the ADJ •...

  • Page 45: Analog Audio Settings

    Automatic Volume Control Settings Have the TV automatically maintain the sound level between different channels. Press the MENU button and then use the ADJ • or • button to highlight the Sound menu and press the 0 K (Enter) button. Use the ADJ •...

  • Page 46: Digital Audio Language Settings

    SOUND & LANGUAGE CONTROL Digital Audio Language Settings You can set digital audio language. Press the MENU button and then use the ADJ • or • button to highlight the Sound menu and press the O K (Enter) button. Use the ADJ • or • button to highlight Multi-Track and press the OK (Enter) button.

  • Page 47: Menu Language

    Menu Language The menus can be shown on the screen inter selected language. First select your language. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 48: Menu Transparency Settings

    SOUND & LANGUAGE CONTROL Menu Transparency Settings Menu Transparency sets the background transparency of the menu. Press the MENU button and then use the ADJ • or • button to highlight the Setup menu and press the O K (Enter) button.

  • Page 49: Presetpicture Settings

    PICTURE CON PRESETPICTURE SETTINGS Picture - Preset Set the picture mode to the program content, e.g. Dynamic or Mild etc. Press the MENU button and then use the ADJ • or • button to highlight the Picture menu and press the OK (Enter) button.

  • Page 50: Screen Format Adjustments

    PICTURECONTROL Manual Picture Adjustment To make custom picture settings, set the Mode to Manual on the menu. Use the Manual settings for the best presentation of movies. The patient will then be able to view movies with more realism. Press the MENU button and then use the ADJ •...

  • Page 51: Noise Reduction

    Noise Reduction The user can watch movies with a more realistic picture on analog channels. Press the MENU button and then use the ADJ • or • button to highlight the Picture menu and press the OK (Enter) button. Use the ADJ • or • button to choose Noise Reduction and press the OK...

  • Page 52: Managing The Channel Banks

    CHANNEL BANK The TV has four channel banks, where the administrator or installer can store groups of TV channels. MANAGING THE CHANNEL BANKS PLANNING THE CHANNEL BANKS ADDING / DELETING CHANNELS Generally, TV channels are grouped into "program A previously prepared programming chart is helpful. packages"...

  • Page 53

    Examples oftypical channel banks c hars f illedin Figure 1.Typical channel banks a fterrunning A utoProgram B Purpose Channel Number 1 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A = Active - - Channel was found during AUTO PROGRAM Figure 2.

  • Page 54

    CHANNEL BANK PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS (or use photocopies) B Purpose Channel Number 10 11 12 13; 14 15 16 17 18 19 20 21 22 23; 24 25 Purpose Channel Number 47 48 49 50 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 Purpose Channel Number...

  • Page 55: Installeroverview

    [oloI,] I[['-"]1 Ir_.1 II I1:1;.I [,,"] ::B'1 [oI,I,] 26LH1DC1 Installer menu and make changes to the default values as required. If necessary, familiarize yourself with the 26LH1 DC1 Installer menu and how to make and save changes in the menu.

  • Page 56: Commercial Mode Setup

    000. - HRC: set to 002 - CATV: set to 001. - IRC: set to 003 26LH1DC1 Installer Menu c. Set item 028 CH OVERIDE to 001. This allows access to Auto Program, Channel Labels and Channel List options in the Channel Menu.

  • Page 57: Cloning Connections/learning Setup

    Master 26LH1 DC1 Clone Programmer damaged. *Note1 : It is assumed that the 26LH1DC1 is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an r-r1 Analog channel, not a digital channel, all equipment...

  • Page 58: Clone Programmer/learning Setup

    Since the Clone Programmer's time cannot be set directly, the current time needs to be copied from a LG TV equipped with M.RI. input capability. LT2002 Clone Programmer Communication...

  • Page 59: Cloning Connections/teaching Setup

    MPI;; OuickSet II Programmel LT2002 Master 26LH1 DC1 Clone Programmer CLONE SELECTION MENU Teach Master 26LH1DC1 's Setup to the target (1) LEARN FROM I'rl 26LH1DC1 (2) TEACH TO TV (3) SET CLONE CLOCK FROM (4) SET TV CLOCK FROM CLONE After learning is complete, remove the M.RI.

  • Page 60

    COMMERCIAL MODE Use the Installer's Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer's Menu Make sure TV is on. Installer's menu items can be accessed by using an installer's remote control.

  • Page 61: Installermenu

    INSTALLERMENU Installer Menu Items 055 through Menu Item Function Value Range Default Value Brief Description of Function and Comments COMPORT EN. 0 / 1 Set to 1 to enable HDMI. Set to 0 to disable. YPrPb EN. 0 / 1 Set to 1 to enable display panel Component 1 input jacks.

  • Page 62

    Off, and 1 is On. volume level setting when the 26LH1 DC1 is turned On. *Note: If set to 1 (On), the 26LH1DC1 does not respond to This feature is use-ful for an in-house information On/Off commands from either the remote or the display control panel, and the SLEEPTIMER is also nonfunctional.

  • Page 63

    020 - FEATURE LEVEL Enables or disables sound mute function. If set to 1, Default set to ZEN 1 for LG IR remote sound cannot be muted, mute is disabled. If set to 0, sound can be muted. Label IR remote con-trol operation.

  • Page 64

    COMMERCIAL MODE INSTALLERMENU Detailed Descriptions of Installer Menu Items 055 - DIS. CH-TIME (Disable Channel-Time) Set to 1 to disable the Channel-Time display, 030 - ACK MASK Channel-Time display will not appear. M.RI. Communication Parameter. Leave at default setting Set to 0 to enable the Channel-Time display. unless changed by Pay-Per-View provider.

  • Page 65

    Detailed Descriptions of Installer Menu Items 092 - RGB2 ENABLE (Red-Green-Blue 2 Enable) Set to 1 to enable display panel Video 3 input for 079 - UPN MSB-1 (UPN Most Significant Byte-1 ) Composite Video, set to 2 to enable for S-Video. Set to User programmable numben most significant byte-1 0 to disable display panel Video 3 input.

  • Page 66: Peference

    COMMERCIAL MODE TV Features / Menus that can be Cloned Closable Menu Features Channel Picture Sound Setup Caption Auto Program Mode Mode Time On/Off (Active channels Contrast Treble Clock Analog Mode found with the Brightness Bass Auto Off Digital Mode channel search) Color Balance...

  • Page 67

    Editing and adding the labels can only be done if there If there is no pre-assigned ICON, you can make a are channels entered into the 26LH1DC1's channel map channel label of up to 7 characters to help in identifying either by using the method described in item 6 (page the channel or network.

  • Page 68

    Aux inputs. Under certain without Icons. conditions, Auto Program Scan is disabled if there is an 6. Transfer the TV setup: Enter the 26LH1DC1 Aux input active. installer menu. Press '2', '5', '5', 'MENU' to start the r" Note 2: Under certain conditions, changes to the input transfer of the TV's setup to the 26LH1 DC1.

  • Page 69

    Check Software Version The software version of the 26LH1DC1 may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at least 10 times until the menu display ceases to respond to MENU key presses.

  • Page 70

    COMMERCIAL MODE 26LHI Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled CAMPORT (Front Video) Functionality Control when: Item 34 Item 40 Front Video 1. Installer Menu Item 34, CAMPORT EN is set to CAMPORT AUTO CAMPORT Operation 1 AND Disabled 2.

  • Page 71

    26LH1 DC1 Aux Input Configuration 26LHIDC1 Aux Input Configuration ENABLE MPI DATA DIRECT MPI DATA DATA STATUS DATA STATUS ACCESS 26LH 1DC1 STATUSTYPE TYPE 0xD2 STATUS Installer Menu Tuning 0x41 SOURCES CURRENT AV TYPE 0XOD SOURCE ENABLED (R/W) SOURCE (R) ASSIGNMENT SOURCE OLD OCV OLD OCV...

  • Page 72: Troubleshooting

    If it is not available it will not appear on the TV screen. 3> I1"1 @ See troubleshooting flow chart. Display Panel Picture ® Connect Antenna/Cable signal source to 26LH1 DC1. ® Check connections on 26LH1DC1. If applicable, connect M.RI. cable to M.RI. device. @ Try another channel.

  • Page 73

    Replace batteries. ® Check that "+" and "-" match in battery compartment. ® Dim room light. Requires compatible Installer remote, contact your LG dealer. @ Set correct Bed 1-2 setting. Picture Reception Broadcast Tuning Mode Digital Channel @ Set Item 103 to 0 for information...

  • Page 74: Clone Troubleshooting

    Only use an appropriate Installer remote to operate clone programmer with 26LH1 DC1. @ 26LH1DC1 must be powered On for clone to work. @ Install 4 fresh AA high-quality alkaline batteries. Connect 26LH1 DC1 to a reliable Analog channel signal source.

  • Page 75

    5 seconds. • After cloning operations are complete, just unplug the LT2002 from the 26LH1DC1. • If the 26LH 1DC1 does not display a picture on the TV (blank screen) after a few seconds, just change channels.

  • Page 76: Clone Troubleshooting Flow Chart

    APPENDIX CLONE TROUBLESHOOTING FLOW CHART Quick Controller Check Plug Press 'POWER' or 'ON/OFF' into AC key on TV Power Outlet 1. Bad TV i e OW oO or 'VOLUME UP/DOWN 'MUTE' key on Remote Red LED 1. Bad PPV Board. 2.

  • Page 77: Tv Operating Check

    TV OPERATING CHECK Press the "On/Off" on the front panel. The On/Off key is always operational, _you ponse Bad TV TV set On Leave Go to Installer menu by pressing "MENU" until the TV stops responding. TV is in Stopped Commercial responding Mode.

  • Page 78: Glossaryof Terms

    Antenna/Cable threaded jack on the channel of sound. On more than digitally. back of the 26LH1DC1. speaker, all the speakers play the 300 TO 75 OHM ADAPTER same audio. Digital Video Interface A small device that connects...

  • Page 79: Installerquick Setup Guide

    INSTALLERQUICK SETUP GUIDE Quick Setup Guide for Integrated Master See table of contents for more information. Antenna Wall Jack Setup Instructions for Making a Master TV 1. Connect TV to signal source, connect power cord and turn TV power on. 2.

  • Page 80

    NOTE...

  • Page 81

    NOTE...

  • Page 82

    NOTE...

  • Page 83

    PRODUCT SPECIFICATIONS The specifications shown above may be changed without prior notice for quality improvement. 27.01 x 19.84 x 4.13 inches / 686.0 x 504.0 x 104.9 mm 28.44 pounds/12.9 AClOO-240V - 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-15, UHF 14-69, CATV 1 -155, DTV 2-69, CADTV 1-155 75 ohm 32 - 104°F (0 _ 40°C) Less than 80%...

Comments to this Manuals

Symbols: 0
Latest comments: