Manual Feed Slot - Brother HL1060 - B/W Laser Printer Service Manual

USER'S GUIDE

MANUAL FEED SLOT

CHAPTER 2 –10
The front multi-purpose sheet feeder 1 also has a manual feed slot. You can
manually load paper sheet by sheet from this slot. You do not need to
remove paper from the multi-purpose sheet feeder when using the manual
feed slot.
When you load one sheet of paper manually:
You do not need to choose manual feed in the Setup dialog box of your
printer driver. While holding the selected size of paper in the proper
orientation (Portrait or Landscape), place the side of the paper you wish
to print on face down into the manual feed slot. Align the paper at the
center of the manual feed slot, and be sure to insert it all the way. (
Move the paper guide of the manual feed slot to the paper width you are
using. ( )
Fig. 2-9 Moving the Paper Guide
When you load more than one sheet of paper manually:
Open the Setup dialog box of the supplied Windows printer driver and
choose Manual Feed in the Paper Source section. Follow the above
instructions to load the first page. The printer automatically starts
printing. After the first page is printed, the dialog box appears and
prompts you to load the next page. Load a sheet and choose OK to
resume printing. Repeat these steps until you have finished printing all
the pages.
!
Caution
If bi-directional communications are not operational between the printer
and the computer, such as when the printer is shared on a network, the
dialog box will not appear to load the next page. Manual paper feeding is
not recommended when your printer is attached to a network.
)