Brother HL1060 - B/W Laser Printer Service Manual page 192

4. Place the drum unit assembly in the plastic bag and seal the bag
completely.
Fig. 5-27 Placing the Drum Unit in the Plastic Bag
5. Close the top cover, the extension wire, and the output tray.
6. Wrap the printer in the plastic bag and place it in the original carton box
with the original Styrofoam packing material.
7. Place any documents (manual and any documentation describing the
reason for repacking printer), and drum unit assembly in the carton box
as shown below.
8. Close the carton box and tape it.
Manuals
Printer
Fig. 5-28 Repacking the Printer
CHAPTER 5 MAINTENANCE
Dust Cover
Drum Unit Including
Toner Cartridge
Carton
CHAPTER 5 –17