Devices supported
For a list of supported devices, see the HP website:
http://www.hp.com/go/san
Operating systems
For a list of supported operating systems, see the HP website:
http://www.hp.com/go/san
Access Gateway support
Access Gateway is supported with the following HP products only:
Brocade 4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)
Brocade 4-Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)
Brocade 8-Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)
HP StorageWorks 4/16 SAN Switch (Brocade 200E)
HP StorageWorks 8/24 SAN Switch (Brocade 300)
HP StorageWorks 8/40 SAN Switch (Brocade 5100)
IMPORTANT:
Although the HP StorageWorks 4/8 SAN Switch uses the same hardware as the 4/16 SAN Switch,
it does not support Access Gateway. The same applies to the HP StorageWorks 8/8 and 8/24 SAN
Switches. Both use the same hardware, but only the 8/24, which has all ports licensed, has Access
Gateway support. The 8/40 switch must also have all ports enabled in order to support Access
Gateway mode. Also, Access Gateway mode is not supported with the Brocade 4-Gb SAN Switch
for HP p-Class BladeSystem (Brocade 4012) if any half-height BladeServers (BL3xp) are configured
in the same sleeve in the p-Class enclosure. For the latest updates, see the HP website:
http://www.hp.com
Access Gateway connectivity is supported by the switches listed in
by the following B-series switches:
HP StorageWorks SAN Switch 4/32
HP StorageWorks SAN Switch 4/32B
HP StorageWorks SAN Switch 4/64
HP StorageWorks SAN Director 4/256
HP StorageWorks SAN Switch 8/80
HP StorageWorks DC SAN Backbone Director
HP StorageWorks DC04 SAN Director
HP StorageWorks 400 Multi-protocol Router
HP StorageWorks EVA4400 Embedded Switch Module
Access Gateway was introduced with Fabric OS 5.2.1b. It allows a switch to operate in agmode,
which allows simplified connectivity between large numbers of servers and the SAN. Access Gateway
10
Access Gateway support
and also