Renaming A Port Group; Disabling The Port Group Policy; Access Gateway Policy Enforcement Matrix - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Renaming a port group

1. Connect to the switch and log in as admin.
2. Enter the command ag --pgrename with the <PG_ID> <newname> operands, for example, to
3. Enter the command ag --pgshow to verify the port group has been renamed.

Disabling the Port Group policy

1. Connect to the switch and log in as admin.
2. Enter the command ag --policydisable with the pg operand.
3. Enter the command ag --pgshow to verify the Port Group policy is disabled.

Access Gateway policy enforcement matrix

The following table shows which combinations of policies can co-exist with each other.
TABLE 3
Policies
Auto Port Configuration
N_Port Grouping
N_Port Trunking
ADS Policy
Access Gateway Administrator's Guide
53-1000605-02
rename port group with pgid 2 to "MyEvenFabric":
switch:admin> ag --pgrename 2 MyEvenFabric
Port Group 2 has been renamed as MyEvenFabric successfully
switch:admin> ag --pgshow
PG_ID N_Ports PG_Name
--------------------------------------
0 None pg0
2 0;2 MyEvenFabric
3 1;3 FirstFabric
switch:admin> ag --policydisable pg
switch:admin> ag --policyshow
AG Policy
----------------------------------------------------------
Port Grouping
Auto Port Configuration
Advance Device Security
----------------------------------------------------------
Policy enforcement matrix
Auto Port Configuration
NA
Mutually exclusive
Can co-exist
Can co-exist
Access Gateway policies
Policy Name State
pg Disabled
auto Disabled
ADS Disabled
Port Grouping N_Port Trunking
Mutually exclusive Can co-exist
N/A Can co-exist
Can coexist N/A
Can co-exist Can co-exist
2
ADS Policy
Can co-exist
Can co-exist
Can co-exist
N/A
21