F_Port Trunking Monitoring - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

2
Access Gateway N_Port trunking

F_Port Trunking monitoring

For F_Port masterless trunking, you must install Filter, EE or TT monitors on the F_Port trunk port.
Whenever the master port changes, it is required to move the monitor to the new master port. For
example, if a master port goes down, a new master is selected from the remaining slave ports. APM
must delete the monitor from the old master and install the monitor on new master port. If you
attempt to add a monitor to a slave port, it is automatically added to the master port.
30 Access Gateway Administrator's Guide
53-1000605-02