Fwshow - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual
Brocade fabric os documentation addendum - supporting fabric os v5.2.x (53-1000429-01-hp)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Reference (550 pages)
Table of Contents
Advertisement
1
Note: Enter commands in lowercase only; mixed case is for readability
fwShow
fwShow
Displays the thresholds monitored by Fabric Watch.
Synopsis
fwshow [--port --persistence] | [--disable --port]
Description
Use this command to display the thresholds monitored by Fabric Watch. This command also displays the
port persistence time and ports with all thresholds disabled.
In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class
threshold is supported only on Embedded platforms.
Table 2-8
Class
Environmental
SFP
Port
Fabric
F/FL_Port (Optical)
F/FL_Port (Copper)
Resource
Note
This command requires a Fabric Watch license.
Note
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands
The operands are as follows:
--port --persistence Displays the time that a port must be persistently in a state before being marked
--disable --port
1-28
Access Gateway mode classes
as such.
Displays the ports that have all associated thresholds disabled.
Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
Advertisement
Table of Contents
