Fwconfigure - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Manual

fwConfigure

Displays and modifies the Fabric Watch configuration.
Synopsis fwconfigure [--enable --port portNumber] | [--disable --port portNumber]
Description Use this command to display and modify threshold information for the Fabric Watch configuration.
Switch elements monitored by Fabric Watch are divided into classes, which are further divided into
areas. Each area can include multiple thresholds. In addition, the command can be used to disable or
enable all thresholds associated with a given port.
Note
This command requires a Fabric Watch license.
Not all platforms support fans or power supplies. If you attempt to configure values for these items, the
"ERROR: No threshold available" error message is displayed.
The Fabric Watch classes and areas are provided in the table.
Table 2-7
Class
Environmental
SFP
Port
Fabric
E_Port
F/FL_Port (Optical)
Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
fwConfigure Fabric Watch Classes and Areas
Area
Temperature
Fan*
Power Supply*
Temperature
RXP
TXP
Current
Voltage
Link failure
Sync loss
Signal loss
Protocol error
Invalid words
Invalid CRCS
RX Performance
TX Performance
State Changes
E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
Same as Port class
Same as Port class
1
fwConfigure
1-23