Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 541

swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6
Enterprise sw
Variables "swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23"
"swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10"
Trap to be sent for tracking log in/log out/configuration changes.
#TYPE
#SUMMARY
#ARGUMENTS
#SEVERITY
#TIMEINDEX
#STATE
Some of the triggers that will generate this trap are:
•
•
•
•
•
Sample trap output for Fabric OS 4.4.0:
This trap gets sent when track-changes is set to ENABLED and is configured to send SNMP traps on
track events. Use the trackchangesset command to enable the track changes feature and SNMP
trap mode.
Fabric OS MIB Reference
53-1000602-02
Track changes has generated a trap.
%s and SSN is #%s
0, 1
Informational
1
Operational
Log out
Unsuccessful log in
Successful log in
Switch configuration changes
Track changes on and off
swTrackChangesInfo.0 = Logout
swSsn.0 = none
swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6
5
525