Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 940

Brocade fabric os mib reference guide v6.1.0 (53-1000602-02, june 2008)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

connUnitPortFCId 1.3.6.1.3.94.1.10.1.11

This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of

24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains

only the domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return

all bits set to 1.

For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned. For an

FL_Port, this is the Fibre Channel ID of the FL_Port (alpa = 0). For a U or E_Port, this is similar to

The FC ID is formatted "DD AA PP" (e.g., "02 00 02"). The Brocade Access Gateway port FC ID

differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a

different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports

and is always zero for N_Ports. Therefore the N_Port FC ID always appears as "DD AA 00" (e.g., "02

00 00"). On a Brocade Access Gateway the FC ID of different ports can have the same "AA" value

but different "DD" values and vice versa.

Fabric OS MIB Reference

53-1000602-02

Chapters

Table of Contents