Implementing Zoning; Create And Enable A Basic Zone Configuration; Detailed Zone Configuration Procedures - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Zoning Concepts

Implementing Zoning

Zoning can be implemented and administered from any switch in the fabric that
has a Zoning license enabled. When a change in the configuration is saved,
enabled, or disabled per the transactional model, it is automatically distributed to
all switches in the fabric.

Create and Enable a Basic Zone Configuration

To create and enable a basic zone configuration, follow the procedure below. For a
detailed explanation see
1. Create a zone: zoneCreate "zonename", "ports"
2. Create a zone configuration: cfgCreate "cfgname", "zonename"
3. Enable the zone configuration: cfgEnable "cfgname"
The following is an example of the above procedure:

Detailed Zone Configuration Procedures

To implement zoning, perform these procedures, as described in the sections
below.
1. Review current configurations, if any.
2. Create an alias.
3. Define the zone.
4. Define the zone configuration.
5. Analyze the zone configuration.
6. Enable the zone configuration.
7. Review the enabled configuration.
Note:
name; that is, an alias cannot have the same name as another alias, zone, or zone
configuration.
30
zonecreate "zone_1", "1,0;1,2"
cfgcreate "zonecfg_1", "zone_1"
cfgenable "zonecfg_1"
Each zone object defined—alias, zone, zone configuration—must have a unique
"Detailed Zone Configuration Procedures" on page 30.
Zoning Version 3.1.x/4.1.x User Guide