Define A Zone Configuration; Analyze The Zone Configuration; Enable A Zone Configuration - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Use the zoneCreate command to create a zone using the newly created aliases
from above as shown in this example.
Use the zoneCreate command to create a zone without using aliases as shown
in this example.

Define a Zone Configuration

To define a zone configuration, specify the list of zones to be included and assign
a zone configuration name; the zone configuration name must be a unique
alpha-numeric string beginning with an alpha character. The underscore character
( _ ) is allowed and zone names are case sensitive. For example,
configuration1 is not the same name as Configuration1.
Use the cfgCreate command to create your zone configuration.

Analyze the Zone Configuration

After creating and saving a zone configuration, HP recommends analyzing the
zone configuration. Doing this will save time and potential issues.
The Zoning Configuration Analyze screen displays a summary of the saved
configuration and warns of zoning conflicts before enabling them. Some potential
errors that might be caught are:
To access the Zoning Configuration Analysis screen, click the Analyze Config
button, in the Zone Administration window in Web Tools.

Enable a Zone Configuration

Use the cfgEnable to enable and save your configuration.
Zoning Version 3.1.x/4.1.x User Guide
test180_Jr:admin>zoneCreate "fabric_zone1", "RAID_1_NodeName;
alias by port level"
test180_Jr:admin>zoneCreate "fabric_zone2",
"20:06:0b:00:00:06:9a:d6; 20:06:0b:00:00:06:9a:d7"
test180_Jr.admin> cfgCreate "cfg1", fabric_zone1; fabric_zone2"
Ports/WWN/Devices that are part of the selected configuration but are not part
of the fabric.
Zones with a single zone object.
test180_Jr:admin>cfgEnable "cfg1"
Setting switch to Fabric mode,
Committing configuration...done.
zone config "cfg1" is in effect
Zoning Concepts
33