Door Features; Dairy Center; Door Bins; Grip Pads - Kenmore 7857 - Elite 24.8 cu. Ft. Bottom Freezer Refrigerator Use And Care Manual

DOOR FEATURES
Your model may have some or all of these features.
To Remove and Replace the Bin Parts:
1. Press either release button to open the tilt-out portion of the
bin.
To remove and replace the dairy center:
1. Remove the dairy center by raising and holding the cover up
while lifting the dairy center up and pulling it straight out.
2. Replace the dairy center by sliding it in above the desired
support and pushing it down until it stops.
To remove and replace the bins:
1. Remove the bin by lifting it up and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
2.
A
A. Releasebuttons
To remove the tilt-out portion of the bin, press in on the
curved levers on each side of the bin. Pull up and out.
NOTES:
• The bin can not be removed if it is tilted out all the way.
Tilt it only part of the way before pressing the curved
levers to remove it.
• Clean the parts as instructed in the "Cleaning" section.
Grips pads help keep items from sliding in the door bins. Grip
pads are removable and are top-rack dishwasher safe for easy
cleaning.
(O_";sOS............. _s Y_O(i/_@Si_ ..... ''_
This bin keeps healthy snacks like fresh fruits and vegetables
convenient for the whole family. It includes a removable berry
basket for rinsing and storing delicate items like grapes and
berries.
To Remove and Replace the Bin:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports
and pushing it down until it stops.
A. Curved lever
3. Reinstall the tilt-out portion of the bin. Be sure it is properly
seated in the bottom of the bin before inserting the curved
levers into position.
4. Replace the interior parts of the bin.
C
A. Strainer basket
B. Dividers
C. Strainer mat
15