Pull-Out Freezer Floor; Door Features; Tilt-Out Freezer Basket - Kenmore 106.6118 series Use & Care Manual

Top mount refrigerator
Table of Contents

Advertisement

Available languages

Available languages

Pull-out Freezer Floor

(on some models)
To Remove and Replace the Freezer Floor:
1. Lift both back “fences” up and out.
2. Remove the freezer floor by pulling it out about 1" (2.5 cm) with
one hand around the air tower section (center back) and one
hand at center front.
3. Lift up floor at rear until hooks release from cabinet and pull
the floor out the rest of the way.
4. Replace the freezer floor by sliding the floor straight in until the
hooks drop into place at rear of cabinet.
5. Replace “fences” by aligning pins with socket in the floor, and
pushing down until they snap into place.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food,
the type of packaging or wrap used (should be airtight and
moisture-proof), and the storage temperature. Seal the package or
container to avoid taste and odor transfer throughout the product.
Ice crystals inside a sealed package are normal.
Put no more unfrozen food into the freezer than will freeze within
24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to
1,350 g per 28 L] of freezer space). Leave enough space in the
freezer for air to circulate around packages. The freezer door must
close tightly. For more information on preparing food for freezing,
check a freezer guide or reliable cookbook.

DOOR FEATURES

Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word “Accessory.” Not all accessories will fit all models. If
you are interested in purchasing one of the accessories, please call
1­800­4­MY­HOME
.
®

Tilt-Out Freezer Basket

The freezer basket tilts out for easy access to items stored in the
freezer door. The freezer basket may be removed for easier
cleaning.
To Remove the Tilt-Out Freezer Basket:
1. Tilt open the freezer basket.
2. Grasp the left-hand bracket. Firmly press the bracket toward
the outside to pull the bracket away from the door tab.
NOTE: To keep the basket from falling, hold the basket while
removing the bracket.
A
A. Bracket
3. Grasp the right-hand bracket. Firmly press the bracket toward
the outside to pull the bracket away from the door tab.
NOTE: To keep the basket from falling, hold the basket while
removing the bracket.
4. Remove the basket.
To Replace the Tilt-Out Freezer Basket:
1. Snap the right-hand bracket onto the tab above the freezer
door shelf
IMPORTANT: Be sure that the bracket touches the shelf and
push the bracket back until it snaps firmly into place.
2. Insert the left-hand basket post into the left-hand bracket.
A
A. Basket post
3. While holding the left-hand bracket in place, insert the right-
hand basket post into the right-hand bracket on the freezer
door.
4. Snap the left-hand bracket onto the tab above the freezer door
shelf.
IMPORTANT: Be sure that the bracket touches the shelf and
push the bracket back until it snaps firmly into place.
Page 15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

106.6023 series106.7023 series

Table of Contents