Ports; Interface Adapter Ports - HP 336045-B21 - Server Console Switch KVM User Manual

Enter up to four addresses of the management stations where you want the SNMP traps and Syslog
4.
information sent.

Ports

You can view and edit the information for the following console switch ports:
•
Interface adapters
•
Cascade devices
•
Local console port UI

Interface adapter ports

To view the port location of each interface adapter attached to the console switch:
Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
Deleting offline interface adapters
Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
1.
Select Delete Offline.
2.
Configuring interface adapter USB speed
NOTE:
Media Interface Adapter (AF603A) and the HP PS2 with Virtual Media Interface Adapter
(AF604A).
Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
1.
Select the checkbox next to the interface adapter you want to edit.
2.
Select either Set USB 1.1 Speed or Set USB 2.0 Speed.
3.
Upgrading the interface adapter firmware
Interface adapters can be automatically updated when the console switch firmware is upgraded, if you
have Auto-Upgrade enabled. If issues occur during the normal upgrade procedure, interface adapters
might require a force upgrade.
To upgrade the interface adapter firmware:
Configuring the interface adapter speed is only applicable to the HP USB with Virtual
Configuring the console switch 41