Network settings
Only Administrators can make changes to the network settings. All other users can view network settings,
but cannot make changes.
General network settings
To configure General network settings:
Select Unit View>Appliance>Appliance Settings>Network>General. The Appliance General Network
1.
Settings page appears.
NOTE:
Configure the following parameters:
2.
LAN Speed
o
ICMP Ping Reply
o
HTTP Port
o
HTTPS Port
o
Configure the network settings for either IPv4 or IPv6 mode. The default setting is IPv4 with BOOTP
3.
enabled. The console switch is dual-stack capable, so both can be configured simultaneously.
DNS settings
To configure DNS settings:
Select Unit View>Appliance>Appliance Settings>DNS. The Appliance DNS Settings page appears.
1.
If you change the LAN speed, you must reboot the console switch.
Configuring the console switch 37