Alliance Laundry Systems NetMaster HWTB21 Programming Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. NetMaster HWTB21
  6. Programming manual
Alliance Laundry Systems NetMaster HWTB21 Programming Manual

Alliance Laundry Systems NetMaster HWTB21 Programming Manual

Alliance laundry systems washer user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

NetMaster
Topload Washer
Refer to Page 7 for Model Numbers
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 210140R2
www.comlaundry.com
October 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetMaster HWTB21 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems NetMaster HWTB21

Summary of Contents for Alliance Laundry Systems NetMaster HWTB21

  • Page 1 NetMaster Topload Washer Refer to Page 7 for Model Numbers Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 210140R2 www.comlaundry.com October 2006...
  • Page 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 210140 NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur.
  • Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 210140...

  • Page 5: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 210140 Model Identification ...
  • Page 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 16. Special Vend A Site Code #1 “+016” ... 51 17. Special Vend A Reg. Hot Wash Vend Price “+017” ... 53 18. Special Vend A Reg. Warm Wash Vend Price “+018” ... 55 19.
  • Page 7 Card Reader Communications (Card Models Only)... 129 Network Communications ... 129 Default Washer Settings... 131 Default Settings ... 131 Default Cycle ... 131 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 210140...
  • Page 8 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 210140...

  • Page 9: Model Identification

    Information in this manual is applicable to these washer models: HWTB21 HWTF21 NWTF21 SWLB20 SWLB21 SWLF20 SWLF21 SWTA21 SWTBA0 SWTBA1 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT SWTB20 SWTB21 SWTC20 SWTC21 SWTF20 SWTF21 SWTH20 SWTH21 SWTJ21...
  • Page 10 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 11: Infra-Red Communications (Optional)

    If the washtub is full of water, the control will 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT move to the Rinse Spin cycle and prompt the user to press the START pad. Once the START pad is pressed, the control will spin out the cycle.
  • Page 12 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 13: Netmaster Identification

    LED Status Lights START pad SELECT WASH TEMP pads (bottom row) 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Select Wash Temp Pads (Refer to Figure 1 ) SELECT WASH TEMP pads are used to select the temperature of the water used for the wash fill.
  • Page 14 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 15: Vfd Display Identification

    SPIN LED SPIN LED is lit for all Spin cycles. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT INSERT COINS/CARD LED INSERT COINS/CARD LED prompts the user for coins or a card to satisfy the vend price. Four digits and decimal point show the vend price remaining to be satisfied.
  • Page 16 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 17: Opening The Washer Lid

    The appropriate LEDs will light while the machine passes through different cycle steps. Any 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Washer Operation coin entered after the first fill cycle will be added to the total coin counter, but the user will not be able to change cycles or water temperature.
  • Page 18 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 19: Rapid Advance Feature

    For detailed information on running diagnostic tests, refer to Testing Machine and NetMaster Functions. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Sales Floor Feature NetMaster washer has a built-in sales floor routine used to display all LED lights and the four digits with the colon and decimal point.

  • Page 20: Service Door And Coin Vault Openings

    For details on programming Special Vend, refer to Programming NetMaster. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Lucky Cycle This feature allows the owner to program the machine to provide a free vend cycle to customers after a certain number of cycles have occurred.
  • Page 21 The service door is located on the top of the meter case. Refer to Figure 3. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NOTE: For card models, the manual programming option is accessed by disconnecting and reconnecting a plug behind the control panel, or by inserting the appropriate card into the card reader.
  • Page 22 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 23: Entering The Manual Mode

    VFD. 6. Press the START (enter) keypad. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Manual Mode is broken into two groups: Manual Programming and Manual Rapid Advance/Diagnostics. Manual Programming can only be turned on or off with the Micro-Wand IIIE, the Smart Card Reader or the Network.
  • Page 24 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 25: Programmable Options Available

    Special Vend A Site Code #1 Special Vend A Reg. Hot Wash Vend Price Special Vend A Reg. Warm Wash Vend Price 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT OPTION DESCRIPTION Special Vend A Reg. Cold Wash Vend Price...

  • Page 26: Audio Signal "+001

    VFD. This number corresponds to the current Audio Signal Programming Value. Figure 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. Locate the desired number in the first column of Table 1 on the following page.

  • Page 27: How To Exit Programming Feature

    Signal Value is entered. Select the desired combination of options and enter the number found in the Signal Value column. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming NetMaster Signal Remove Coin/Card...

  • Page 28: Reg. Hot Wash Vend Price "+002

    “+002” appears in the VFD. Refer to Figure 9. Figure 9 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+002” appears in the VFD, press the START (enter) keypad. There are five digits in the Reg.
  • Page 29 Vend Price), refer to option 3. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 30: Reg. Warm Wash Vend Price "+003

    “+003” appears in the VFD. Refer to Figure 14. Figure 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+003” appears in the VFD, press the START (enter) keypad. There are five digits in the Reg.
  • Page 31 Vend Price), refer to option 4. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 32: Reg. Cold Wash Vend Price "+004

    “+004” appears in the VFD. Refer to Figure 19. Figure 19 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+004” appears in the VFD, press the START (enter) keypad. There are five digits in the Reg.
  • Page 33 Wash Vend Price), refer to option 5. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 34: Site Code #1 Hot Wash Vend Price "+005

    “+005” appears in the VFD. Refer to Figure 24. Figure 24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+005” appears in the VFD, press the START (enter) keypad. There are five digits in the Site Code #1 Hot Wash Vend Price.
  • Page 35 Wash Vend Price), refer to option 6. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 36: Site Code #1 Warm Wash Vend Price "+006

    “+006” appears in the VFD. Refer to Figure 29. Figure 29 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+006” appears in the VFD, press the START (enter) keypad. There are five digits in the Site Code #1 Warm Wash Vend Price.
  • Page 37 Wash Vend Price), refer to option 7. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 38: Site Code #1 Cold Wash Vend Price "+007

    “+007” appears in the VFD. Refer to Figure 34. Figure 34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+007” appears in the VFD, press the START (enter) keypad. There are five digits in the Site Code #1 Cold Wash Vend Price.
  • Page 39 Price), refer to option 8. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 40: Special Cycle Vend Price "+008

    “+008” appears in the VFD. Refer to Figure 39. Figure 39 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+008” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Cycle Vend Price.
  • Page 41 Enable), refer to option 9. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming NetMaster How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 42: Special Vend A Days Enable "+009

    “+009” appears in the VFD. Refer to Figure 44. Figure 44 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+009” appears in the VFD, press the START (enter) keypad. A number will appear in the VFD that corresponds to the current Special Vend A Days Enable Programming Value.

  • Page 43: How To Read Table

    “SPA” VALUE 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Each column of days contains a unique combination of the words “ON” and “OFF” that indicates if that column’s day is turned on or off when the “SPA”...
  • Page 44 Programming NetMaster “SPA” VALUE © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT “+009” (continued) THUR Table 2 ON/OFF 210140...
  • Page 45 “SPA” VALUE 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT “+009” (continued) THUR Table 2 Programming NetMaster ON/OFF...
  • Page 46 Programming NetMaster “+009” (continued) “SPA” VALUE THUR ON/OFF Table 2 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 47: Special Vend A Start Hour "+010

    NOTE: The hours will be displayed in military time. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start hour to the desired hour.

  • Page 48: Special Vend A Length In Hours "+011

    START (enter) keypad. The current length in hours will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current length of hours to the desired number of hours.

  • Page 49: Special Vend A Start Month "+012

    START (enter) keypad. The current start month will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start month to the desired month.

  • Page 50: Special Vend A Start Date "+013

    START (enter) keypad. The current start date will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the start date to the desired date.

  • Page 51: Special Vend A End Month "+014

    START (enter) keypad. The current end month will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the end month to the desired month.

  • Page 52: Special Vend A End Date "+015

    START (enter) keypad. The current end date will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the end date to the desired date.

  • Page 53: Special Vend A Site Code #1 "+016

    Figure 65. Figure 65 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+016” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Vend A Site Code #1. The fifth digit will appear in the VFD and will flash one second on, one second off.
  • Page 54 Hot Wash Vend Price), refer to option 17. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 55: Special Vend A Reg. Hot Wash Vend Price "+017

    Figure 70. Figure 70 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+017” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Vend A Reg. Hot Wash Vend Price.
  • Page 56 Warm Wash Vend Price), refer to option 18. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 57: Special Vend A Reg. Warm Wash Vend Price "+018

    Figure 75. Figure 75 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+018” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Vend A Reg. Warm Wash Vend Price.
  • Page 58 Cold Wash Vend Price), refer to option 19. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 59: Special Vend A Reg. Cold Wash Vend Price "+019

    Figure 80. Figure 80 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+019” appears in the VFD, press the START (enter) keypad. There are five digits in the Special Vend A Reg. Cold Wash Vend Price.
  • Page 60 Auto-Shutdown Enable), refer to option 20. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 61: Special Vend A Auto-Shutdown Enable "+020

    Auto-Shutdown is disabled and “255” will be displayed when Auto-Shutdown is enabled. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current value displayed in the VFD to the desired value.

  • Page 62: Coin #1 Value "+021

    “+021” appears in the VFD. Refer to Figure 88. Figure 88 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+021” appears in the VFD, press the START (enter) keypad.There are five digits in the Coin #1 Value.
  • Page 63 22. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 64: Coin #2 Value "+022

    “+022” appears in the VFD. Refer to Figure 93. Figure 93 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+022” appears in the VFD, press the START (enter) keypad. There are five digits in the Coin #2 Value.
  • Page 65 23. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 66: Start Pulse Value "+023

    “+023” appears in the VFD. Refer to Figure 98. Figure 98 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+023” appears in the VFD, press the START (enter) keypad. There are five digits in the Start Pulse Value.
  • Page 67 Cycle/Temperature), refer to option 24. To program other options, refer to the appropriate section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 68: Default Cycle/Temperature "+024

    VFD. This number corresponds to the current default cycle value. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number to the desired number selected from Table 3 on the following page.

  • Page 69: How To Read Table

    Normal Cycle Value 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT column’s option is turned on or off when the Default Value is entered. Select the desired combination of options and enter the number found in the Default Value column.

  • Page 70: Power Fail Reset "+025

    VFD. This number corresponds to the current Power Fail Reset setting. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number to the desired number selected from Table 4.
  • Page 71 NUMBER TO ENTER IN STEP 6 000 – 127 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT If 133 is entered, the current cycle will be saved for up to five minutes. If power is not restored within five minutes, the control will erase the cycle status.

  • Page 72: Set Real-Time Clock Minutes "+026

    START (enter) keypad. The current time in minutes will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the minutes to the correct time.

  • Page 73: Set Real-Time Clock Hours "+027

    NOTE: The hours will be displayed in military time. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the hours to the correct time.

  • Page 74: Set Real-Time Clock Day "+028

    START (enter) keypad. The current day of the week will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the day until correct.

  • Page 75: Set Real-Time Clock Date "+029

    START (enter) keypad. The current day of the month will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the day of the month until correct.

  • Page 76: Set Real-Time Clock Month "+030

    START (enter) keypad. The current month will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the month until correct.

  • Page 77: Set Real-Time Clock Year "+031

    START (enter) keypad. The current year will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the year until correct.

  • Page 78: Set Real-Time Clock Century "+032

    START (enter) keypad. The current century will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the century until correct.

  • Page 79: Normal Wash Agitate Time "+033

    Normal Wash Agitate Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 80: Normal Extra Rinse Agitate Time "+034

    Normal Extra Rinse Agitate Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 81: Normal Rinse Agitate Time "+035

    Normal Rinse Agitate Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 82: Normal Final Spin Time "+036

    Normal Final Spin Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 83: Permanent Press Wash Agitate Time "+037

    Permanent Press Wash Agitate Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 84: Permanent Press Extra Rinse Agitate Time "+038

    Permanent Press Extra Rinse Agitate Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 85: Permanent Press Rinse Agitate Time "+039

    Permanent Press Rinse Agitate Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 86: Permanent Press Final Spin Time "+040

    Permanent Press Final Spin Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 87: Delicate Wash Agitate Time "+041

    Delicate Wash Agitate Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 88: Delicate Extra Rinse Agitate Time "+042

    Delicate Extra Rinse Agitate Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 89: Delicate Rinse Agitate Time "+043

    Delicate Rinse Agitate time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 90: Delicate Final Spin Time "+044

    Delicate Final Spin Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 91: Warm Rinse Enable/Disable "+045

    One (1) = Option Enabled Zero (0) = Option Disabled 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number to the desired number.

  • Page 92: Control Configuration Data #1 "+046

    VFD. This number corresponds to the current Control Configuration Data #1 Value. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number to the desired number selected from Table 5.
  • Page 93 OFF = Turns off the European Community Power Fail feature. ON = Turns on the European Community Power Fail feature. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming NetMaster To change any or all of these configuration options, review the following descriptions carefully and choose the appropriate configuration value from Table 5.
  • Page 94 Programming NetMaster Config #1 EC Power Value Fail © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT “+046” Auto Decimal Infra-red Collect Point Access Table 5 Wash Temp Daylight Indicate Savings 210140...
  • Page 95 Config #1 EC Power Value Fail 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT “+046” (continued) Auto Decimal Infra-red Collect Point Access Table 5 Programming NetMaster Wash Temp Daylight Indicate Savings...

  • Page 96: Control Configuration Data #3 "+047

    VFD. This number corresponds to the current Control Configuration Data #3 Value. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number to the desired number selected from Table 6.
  • Page 97 Available Output Mode. Config #3 Value 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NOTE: Selecting “Ready Mode” for the available output will turn off the available output after the first pulse is received. Selecting “Until Start Mode”...

  • Page 98: Lucky Option "+048

    4. When “+048” appears in the VFD, press the START (enter) keypad. A number will appear in © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT the VFD. This number corresponds to the current Lucky Option Programming Value.

  • Page 99: Special Cycle Option "+049

    VFD. This number corresponds to the current Special Cycle Option Programming Value. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Locate the desired number in the first column of Table 8 on the following page.

  • Page 100: How To Read Table

    Special Cycle Option Value © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Each column of options contains a unique combination of the words “ON” and “OFF” that indicates if that column’s option is turned on or off when the Special Cycle Option Value is entered.

  • Page 101: Special Cycle Extra Wash Time "+050

    Special Cycle Extra Wash Time will appear in the VFD. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 102: Special Cycle Extra Extra-Rinse Time "+051

    Special Cycle Extra Extra- Rinse Time will appear in the VFD. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number of minutes displayed in the VFD to the desired number of minutes.

  • Page 103: Smart Card Maximum Value "+052

    Figure 187. Figure 187 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+052” appears in the VFD, press the START (enter) keypad. There are five digits in the Smart Card Maximum Value. The fifth digit will appear in the VFD and will flash one second on, one second off.
  • Page 104 NOTE: To program “+053” (Site Code #1), refer to option 53. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 105: Site Code #1 "+053

    Figure 192. Figure 192 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. When “+053” appears in the VFD, press the START (enter) keypad. There are five digits in Site Code #1. The fifth digit will appear in the VFD and will flash one second on, one second off.
  • Page 106 Programming Parameter), refer to option 54. To program other options, refer to the appropriate section. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Programming Feature 1. Be sure the control shows a programmable option, not a value.

  • Page 107: Error Code Programming Parameter "+054

    5. Locate the desired number in the first column of Table 9 on the following page. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 6. Press the DELICATES (+) or the COLD (-) keypad to increase or decrease the current number until correct.
  • Page 108 6. The other columns correspond to individual options. Error Code Value © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Each column of options contains a unique combination of the words “ON” and “OFF” that indicates if that column’s option is turned on or off when the Error...

  • Page 109: Start Pulse Mode "+055

    VFD. This number corresponds to the current Start Pulse Mode Programming Value. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Locate the desired number in the first column of Table 10 below. Start Pulse Mode Value 6.
  • Page 110 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 111: Collecting Audit Information

    Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value Figure 203 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Display “ CyCL “...
  • Page 112 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 113: How To Enter Manual Reset

    3. Press the START (enter) keypad. The control will display “WAIT” until the programming is complete. Once the program has been reset, the control will revert back to the ready mode. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Manual Reset C830I C830I...
  • Page 114 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 115: Testing Machine And Electronic Control Functions

    Diagnostic (Testing) Mode – Quick Reference Chart Test Number 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Enter Testing Feature 1. Control must be in Manual Mode. Refer to Entering the Manual Mode.

  • Page 116: Diagnostic Test Descriptions

    NORMAL and PERM PRESS keypads. The control will return to the ready mode. Refer to Figure 2. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Coin Drop #1 Input Test This option tests coin drop #1. To start test, control must be in the Testing Mode.
  • Page 117 Testing Mode. Refer to “How to Start Tests” at the beginning of this section. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Testing Machine and Electronic Control Functions To enter, press the START (enter) keypad. The VFD display will show “ST:XX”.
  • Page 118 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 119: Error Codes

    Invalid Machine Type EC:19 No Card Reader Communication 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Error Codes beginning with “EC” refer to NetMaster card reader errors. All other errors refer to electronic control errors.
  • Page 120 E:FL Fill Error E:dr Drain Error © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Cause/ Corrective Action Faulty card or dirty contact. Clean chip on card or card reader contacts. Try card again. If error persists, card may be faulty.
  • Page 121 Coin Error Invalid coin pulse or inoperative coin sensor. Check coin drop area and remove obstructions. If error persists, tampering may have occured. Evaluate security procedures. Table 15 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 122 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 123: How To Enter Sales Floor Feature

    3. Press the START (enter) keypad. The display will light up. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Sales Floor Feature 1. Be sure service door is open. 2. While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand.
  • Page 124 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 125: How To Exit Rapid Advance Feature

    Continue pressing the START (enter) keypad until the cycle is completed. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT How to Exit Rapid Advance Feature 1. Advance through the cycles until reaching the ready mode. Refer to Figure 2.
  • Page 126 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 127: Clear Vend Feature

    2. While pressing and holding the HOT keypad with one hand, press the PERM PRESS keypad with the other hand. The control will reset to the ready mode. Refer to Figure 2. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 128 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 129: Power Fail Reset Disabled

    START pad to continue the cycle from the point it left off. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Power Fail Reset Enabled If the length of the power failure is less than the programmed Power Failure Reset time, the control will resume the cycle from the point it left off.
  • Page 130 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 131: Copyright, Alliance Laundry Systems Llc – Do Not Copy Or Transmit

    NOTE: The Infra-red Communications option must be turned on. Refer to option 46 in Programming NetMaster. 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Card Reader Communications (Card Models Only) The Card Reader Communications feature allows the washer control to communicate with the Card Reader.
  • Page 132 Notes 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 133: Default Washer Settings

    Decimal Point Auto Collect EC Power Fail 210140 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Default Cycle The cycle listed is the default PERM PRESS cycle programmed in at the factory. This cycle can be made longer or shorter by reprogramming the agitate times.

This manual is also suitable for:

Netmaster hwtf21Netmaster nwtf21Netmaster swlb20Netmaster swlb21Netmaster swlf20Netmaster swlf21 ... Show all

Table of Contents

Save PDF