Failover Configuration With An American Dynamics Matrix Switch - Cisco 4116 - EtherFast Switch Design Manual

All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Figure 65. American Dynamics Keyboard Integration

Failover Configuration with an American Dynamics Matrix Switch

This section describes how to configure a hybrid solution with an American Dynamics matrix switch
for a matrix-based N+N redundancy.
Note:
The example in this section focuses on the MegaPower LT matrix switch, but similar steps
apply to other American Dynamics systems.
Figure 66 shows how an ISP can act as a failover recorder for other ISPs by using an American
Dynamics matrix switch.
Figure 66. Hybrid Failover Solution
Design Guide
6-13
Page-6-13