Table of Contents
Advertisement
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Figure 32.
Failover Mode
In the window for configuring video matrix settings, change the Video Matrix type to match the
appropriate system. In Figure 33, Bosch has been selected to support a Bosch matrix switch.
Figure 33.
Matrix Settings
Each port on the failover ISP must be configured to match the port number of the monitor output
port from the matrix switch. In Figure 34, the input 1 port of the ISP is configured to receive the
video stream from the monitor output 1 port of the matrix switch. The desired storage settings, such
as video resolution and frame rate, also are specified for this port.
Design Guide
5-10
Page-5-10
Advertisement
Table of Contents
