Cabling The Rcm - IBM 1735R16 Installer And User Manual

Cabling the RCM

Figure 2.3 illustrates one possible configuration for your RCM. Follow the detailed
set of procedures following Figure 2.3 to successfully install your RCM.
Analog Port
Chained C2T
Servers
Server
Server
Server
chained servers
Figure 2.3: Basic RCM Configuration
ATTENTION: To reduce the risk of electric shock or damage to your equipment -
- Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
- Disconnect the power from the unit by unplugging the power cord from either the electrical
outlet or the unit.
Remote Workstations
Network
RCM
CAT 5
CCO
CAT 5
Up to 16
per ARI port
CAT 5
Chapter 2: Installation
ARI Ports
CAT 5
IBM NetBAY Switch
KCO
Up to 16
chained servers
UCO
per ARI port
CAT 5
13
Server
Server
Server
KVM
Server
Server
Server