42
RCM Installer and User Guide
Figure 3.18: CO Version Dialog Box
6.
Click X to close the Version dialog box.
Scanning Your System
In scan mode, the RCM automatically scans from port to port ( server to
server). You can select up to 16 servers from a list of all servers attached to
your unit. You can display the list by either the server's name or eID number
by pressing the appropriate button.
NOTE: Scanning is only available to the analog user.
To add servers to the scan list:
1.
If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2.
Click Setup - Scan. The Scan dialog box appears.
Figure 3.19: Scan Dialog Box
3.
The dialog box contains a listing of all the servers attached to your unit.