D-Link DGS-3100-48 User Manual page 257

DGS-3100 Series Gigabit Stackable Managed Switch User Manual
ID SEVERITY
SYSLG8.40.14 Warning
SYSLG8.43.10 Warning
SYSLG8.43.7 Warning
SYSLG8.44.0 Warning
SYSLG8.44.1 Warning
SYSLG8.45.8 Warning
SYSLG8.45.9 Warning
SYSLG8.46.10 Warning
SYSLG8.48.35 Warning
SYSLG8.48.36 Warning
SYSLG8.48.37 Warning
SYSLG8.48.38 Warning
SYSLG8.48.41 Warning
SYSLG8.48.42 Warning
SYSLG8.49.10 Warning
SYSLG8.49.12 Warning
SYSLG8.49.13 Warning
SYSLG8.49.51 Warning
241
CATEGORY MESSAGE
%(1)s Packet forward by
Security Policy rule no.%(2)s .
TFTP connection cannot
be started without IP
IP address
Empty file downloaded,
Up/Download configuration unchanged
IGMP Filter table is
FDB overflowed
Failed to insert entry to
FDB IGMP Filter table
The copy operation has
Up/Download failed
The configuration file has
Up/Download
failed to download
Management ACL drop
packet received on
interface %(1)s%(2)j from
%(3)y to %(4)y protocol
Security %(5)d service %(6)s
%(1)j: STP status
STP Blocking
%(1)j: STP status
STP Forwarding
%(1)j of instance %(2)d:
STP STP status Blocking
%(1)j of instance %(2)d:
STP STP status Forwarding
%(1)j: STP Loopback
STP Detection.
%(1)j: STP Loopback
STP Detection resolved.
sshpConId: connection
AAA %(1)d outside client range
sshpClientId: connection
id %(1)d is in the range
AAA reserved for channels
sshpClientId: connection
%(1)d is outside the range
AAA reserved for clients
The SSH daemon can not
use the configured TCP
SSH
port (the port is already
DESCRIPTION
specified security criteria.
The specified packet is
forward by the specified
Policy rule.
Configuration error. The
TFTP connection cannot be
started without an IP
address.
Configuration file is empty.
The IGMP Filter table is
full.
Entries cannot be added to
the table that a user has
access to because the
platform reached its limit.
The copy operation has
failed.
The configuration file has
failed to download.
A Management ACL drop
packet is received on the
specified interface.
STP status is in Blocking
mode.
STP status is in Forwarding
mode.
For the specified instance
the STP status is in
Blocking mode.
For the specified instance
the STP status is in
Forwarding mode.
Excessive number of clients
serviced by the system.
Excessive number of
channels in the system.
Excessive number of clients
serviced by the system.
The SSH daemon cannot
use the configured TCP port
(the port is already being