Close The Door And Press The Start/Stop Button; Once The Program Has Finished - Asko WMC63VACS Operating Instructions Manual

Cleaning machine
Table of Contents

Advertisement

Operating instructions
5
Close the door and press the
Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. During the actual program, the time
counts down in minutes. Once a program is
selected, the estimated program time is displayed.
This may differ from time to time depending on
the temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous cleaning using the same
program, "1" will be displayed until the program
finishes. This is normal!
Stopping or changing a program
You can also stop a program by pressing the
Start/Stop button for three seconds. "Stop"
appears on the display. To restart the machine,
select a new program, add any extra detergent
needed, and press the Start/Stop button.
8
6

Once the program has finished

Once a program has finished, "End"
appears on the display.
The door opens automatically once the program
has finished. If you want to deactivate Automatic
Door Opening, see the "Selecting settings"
section.
• Remove the garment.
• Turn off the main power switch and you will
save energy.
If you have small children or pets at home, close
the door once you have removed the laundry.
Backlighting
Two minutes after the program finishes the display
backlighting enters energy saving mode.
Customer Care Center
1-800-898-1879
www.askousa.com

Advertisement

Table of Contents
loading

Table of Contents