Table of Contents
Advertisement
Dishwashing
6
Select options
To select an option, press one of the option
buttons. The field under the button lights when
the option is activated. The available options depend
on the selected program. Once you have started the
program, the options you selected are saved for the
next time you use the same program. An exception is
the Delayed start option.
High temperature
Activate this option for improved dishwashing results.
The machine then uses a higher temperature for the
main wash.
If you want to use the lower temperature, press again
so that the field under the button turns off.
You can vary the temperature as shown below:
Heavy:
130 °F (55 °C)/ 160 °F (70 °C)
Normal:
130 °F (55 °C)/ 150 °F (65 °C)
Daily:
140 °F (60 °C)/ 150 °F (65 °C)
Quick:
85 °F (30 °C)/ 140 °F (60 °C)
Super Quick:
85 °F (30 °C)/ 140 °F (60 °C)
Delicate:
105 °F (40 °C)/ 120 °F (50 °C)
Eco:
120 °F (50 °C)/ 140 °F (60 °C)
Long dry
A higher temperature in the final rinse and a longer
drying phase improves the drying result if you activate
the Long dry option. This causes a slight increase in
energy consumption. This option can be used with all
programs except Rinse & Dry and Rinse & Hold.
If you want a program with Short dry, press again so
that the field under the button turns off.
16
Delayed start
When you select Delayed start, the dishwasher will start
1-24 hours after you press the Start/Stop button.
1. Press the button once to activate Delayed start.
Press the button several times – or hold it in – to set
the desired number of hours.
2. Press Start/Stop and the dishwasher counts down
1 hour at a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want
to cancel the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the
program.
7
Press Start/Stop and close the
door
The display flashes three times with the
remaining time to indicate that the program has started.
Close the door properly, otherwise the dishwasher will
not start. The display indicates
NOTE!
If the machine does not start within 2 minutes of the
last button press, the display returns to showing the
last program run.
Time remaining
Once you have selected a program and options, the
display indicates how long the program took the last
time it was used. The remaining time is updated after
the water for the final rinse has been heated.
This may differ somewhat from time to time depending
on the temperature of the water supply, the amount of
dishes, the ambient temperature, and other factors.
NOTE!
During the first run of each program, the remaining
time displayed can be slightly misleading, as the
dishwasher is estimating the time. When you run the
program a second time, the dishwasher will calculate
the remaining time based on the previous duration of
the program.
Customer Care Center
1-800-898-1879
www.askousa.com
if the door is open.
Hide quick links:
Advertisement
Table of Contents
