Testing Nfs - Compaq N2400 - TaskSmart - 1 GB RAM Administration Manual

Testing NFS

1. Be sure to establish a folder to export, and export it to NFS clients.
2. From a UNIX or Linux client, type:
showmount -e TaskSmart N2400 name
NOTE: The showmount command works only after the TaskSmart N2400 name is added
to the /etc/hosts file of the UNIX client, or if the DNS recognizes the TaskSmart N2400
name.
3. Compile a list of exported file systems that the TaskSmart N2400
appliance is exporting to NFS clients.
4. To associate an exported file system to the client directory called
/mount-point
mount –t nfs servername:/exportname /mount-point
, open the client console screen, and then type:
Integrating UNIX into Windows NT 4-29