Useful adjustment settings
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
INPUT
FLASHBACK
@©
FREEZE
MENU
0
@
Press INPUT
to select the desired
input
source.
Press MENU to display the MENU screen, and
then press _11/_ to select "Setup".
Press A/Y
to select "Input Label", and then
press ENTER.
Press A/Y/4/_
to select the new name for
the input mode, and then press ENTER,
Example
DVD
Allows you to set a time when the TV automatically
switches to standby.
J
--
FAVORITECH
--
I Ill
®®®s®l
Press SLEEP.
" The remaining time displays when the sleep timer
has been set.
I Sbep
Timer: Remaining
30 •
Each time you press SLEEP,
the remaining
time switches
as shown
below.
., When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
® Five minutes before the time expires, the
remaining time displays every minute.
I 1"1
s0 I"1 G0 I
Select "Off" by pressing SLEEP to cancel the sleep timer.
., The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
Press MENU to exit.
• You cannot change labels if the iNPUT SOURCE is TV.
Q-
34