Advanced Picture Adjustments; Film Mode; 3D-Y/C; Color Temperature - Sharp LC 42D43U - 42" LCD TV Operation Manual

Basic adjustment settings
This TV provides various advanced functions for
optimizing the picture quality.
Press MENU to display the MENU screen, and
then press _/_ to select "Picture".
Press A/Y to select "Advanced", and then
press ENTER.
Press A/Y to select a specific adjustment
item, and then press ENTER.
• You can select "Color Temp.", "Black", "I/P
Setting", "Film Mode", "3D-Y/C", "Monochrome '_
or "Range of OPC".
Press A/T (or _/_) to select the desired
parameter.
,, See the table for the sebctabb parameters.
Press MENU to exit.
For a better white balance, use color temperature
correction.
High
Mid-High
Middle
Mid-Low
Low
White with Bluish tone
t
White with Reddish tone
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
On Detects, analyzes, converts film source
Off Normal vbwing mode
"Film Mode" does not function when you set:
-- the "AV Mode" to "Game" or
-- tile "l/P Setting" to "Fast".
Provides high quality images with minimal dot crawl
and cross color noise.
Slow For still images
Standard Normal adjustment
Fast For moving images
Off (2D) For Game Mode
3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
On For high detail in black portions
Off No adjustment
Converts input signals depending on the type of
images.
Fast Suitable for fast-moving images
Slow Suitable for smooth images with low
amounts of flickers
"I/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P, or 10801.
On For viewing in monochrome
Off Normal color
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of + 16 and a minimum of 16.
Max. 15 through + 16
Min. 16 through +15
The range of OPC settings are active only when the OPC is
set to On.
,, The maximum setting cannot be set to a smaller number
than the minimum setting.
,, The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small. (D- 27