2.
Specify an SSID (Service Set Identifier), which is a unique identifier attached
to packets sent over WLAN.
3.
Select a security level to enable encryption methods:
Low(None): No security level.
Medium (WEP-64bits):
Medium (WEP-128 bits)
High (WPA-PSK/WPA-PSK)
4.
Click Finish to save the configuration.
You can set up the advanced functions. Refer to Advance Settings section on
page 4-9 for more details.
4.2.2
Access Point (AP) mode
In the Access Point (AP) mode, you can connect the Ethernet port and your
wireless devices into the same local area network (LAN).
Wireless computer
To configure the ASUS WL-330gE in Access Point/AP mode:
1.
In the Mode Quick Setup page, click the AP tab. The Access Point (AP) page
is displayed.
ASUS WL-330gE Portable Wireless Access Point
WL-330gE
4-5