Replacing The Cable Connections Of Other Devices; Sharing Internet Connection With Other Computers - Asus WL-330GE - Wireless Access Point User Manual

5.3 Replacing the cable connections of other
devices
You can also use the WL-330gE to replace your Xbox, PlayStation
box network cable connection.
To do this:
1. Switch the WL-330gE to Ethernet adapter mode using the mode switch.
(Default SSID: ANY)
2. Place the WL-330gE nearest the AP you wish to connect, then turn on the
device.
3. Connect one end of the supplied RJ-45 cable to the Ethernet port of the device
and the other end to the Xbox, PlayStation
4. Set the IP address of the Xbox, PlayStation
connection to the local network. Verify your connection.
Make sure the WL-330gE MAC cloning feature is enabled when using the
device in this setup. Use the Wireless Setting Utility to enable MAC cloning. See
page 3-24 for details on MAC cloning.
5.4 Sharing Internet connection with other
computers
Refer to the typical network configuration below and a table on the next page for
information on Internet connection sharing with other computers in your office or
home network.
˝
Internet
Use the mode switch to set the WL-330gE to AP mode before sharing an
Internet connection with other computers in your network.
ASUS WL-330gE Portable Wireless Access Point
ADSL/Cable modem
2, or set-top box Ethernet port.
®
2, or set-top box toestablish
®
WL-330gE
2, orset-top
®
Wireless computer
5-3