Quick Setup In Access Point Mode - Asus WL-320gE Quick Start Manual

WL-320gE Access Point Quick Start Guide

6) Quick Setup in Access Point mode

1. Click Next to enter the Quick Setup
page. Follow the instructions to set up the
ASUS Access Point.
2. Set mode to AP or WDS(Bridge),
Station(Client) or URE(Repeater).
3. Setting up your wireless interface.
Specify to your wireless router an
SSID (Service Set Identifier), which is
a unique identifier attached to packets
s e n t o v e r W L A N . T h i s i d e n t i f i e r
emulates a password when a device
attempts to communicate with your
wireless router via WLAN.
If you want to protect transmitted data,
s e l e c t a S e c u r i t y L e v e l t o e n a b l e
encryption methods.
Medium: Only users with the same WEP
key settings can connect to your wireless
router and transmit data using 64bits or
128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.
4. Input four sets of WEP keys in the
WEP Key fields (10 hexadecimal digits
for WEP 64bits, 26 hexadecimal digits
for WEP 128bits). You can also let the
system generate the keys by inputting
a Passphrase. Record the Passphrase
and the WEP keys in your notebook,
then click Finish.
For example, if we select WEP 64bits
encryption mode and input 11111 as
the Passphrase, the WEP Keys are
generated automatically.
5. Click Save&Restart to restart the
wireless router and activate the new
settings.
0