2.2.3
Using USB bus power
1.
Insert one end of the supplied RJ-45 cable to the WL-330gE Ethernet port.
2.
Insert the other end of the RJ-45 cable to the Ethernet port on your computer,
notebook, modem or switch.
3.
Insert one end of the supplied USB cable to the DC-IN socket of the device.
4.
Insert the other end of the USB cable to any available USB port on your
computer, notebook, network hub, modem/switch, or router.
5.
Turn on your computer/notebook, or connect the network hub, modem/switch,
or router power adapter to a wall socket.
6.
Connect the power adapter of the network hub, computer/notebook, modem/
switch, or router to a wall socket.
Wall socket
2-4
Modem/Switch/PC
USB
4
2
5
Chapter 2: Hardware installation
WL-330gE
3
1