Factory Default; Restoring Factory Default Settings - Asus WL-330GE - Wireless Access Point User Manual

Enhanced 802.11g pocket wireless access point

Hide thumbs Also See for WL-330GE - Wireless Access Point:

Table of Contents

Factory Default

Web Manager

You can reset all settings to their factory default settings through the web manager

using the "Factory Default" page in "Advanced Setup". Click the Restore button

and wait about 30 seconds before trying to access the ASUS 802.11g AP.

Hardware

You can reset all settings to their factory defaults manually by pushing the "Reset"

button of the ASUS 802.11g AP while it is ON. See page 21. Push the "Reset"

button with a pen or a paper clip for about 5 seconds or until the power LED starts

blinking.

Note: You will be notified when factory default settings are restored while using

the web manager.

4-32

Chapter 4: Configuration

Table of Contents

Show Quick Links

Table of Contents

Wl-330