D-Link DCS-3220 - SECURICAM Network Camera Product Manual page 79

Using IP surveillance Software (continued)
Monitor Program (continued)
Changing the Camera Order in the List
You can "drag and drop" in the grid area of the camera list to change the
sequence of the connected Network Cameras, which is shown below. This will
allow you to rearrange the cameras in an order of your choice. Once the camera
is moved to a specified location, the proceeding cameras will then move 1
position up or 1 position down depending on which direction the selected camera
was moved.
Step 1:
Press the left mouse button
at the gray index field.
Once you click the "Save" button in the left-bottom corner of this window, the
changes for all camera configurations will be saved and will be applied
immediately to the IP surveillance.
Step 2:
Move the mouse to your new
selected location and release
the mouse button. Then Video
1 will be moved (to the 12th
row in this example).
79