D-Link DCS-3220 - SECURICAM Network Camera Product Manual page 106

Using IP surveillance Software (continued)
Playback Program (continued)
When you successfully log in to the playback system, the main window will be
shown on the top of the screen and the display resolution will be changed to
1024x768 automatically (see P. 105). There are four main areas, i.e. display
area, histogram area, control area, and status area. There are also three
visualized controls , i.e. area selection indicator, frame selection indicator, and
pull bar. These features provide much more convenience while searching
recorded video in the IP surveillance database.
Main Areas
Display Area
The display area is able to show the surveillance database of each camera by
time. You can change the video size through the display adjustment tool and the
playback method through the play control tool. Under the normal display mode
as shown in the figure below, you can just double click on the frame area to
change the frame size to 1:1 or 2.25:1.
Playback method
Display adjustment tool
106