Plessey Code - Honeywell 4800dr - Document Camera Barcode Manual

On
When Check Character is set to Validate, but Don't Transmit, the unit will only read MSI barcodes
printed with the specified type check character, but will not transmit the check character with the scanned
data.
* Validate Type 10, but Don't
Transmit
MSI Message Length
Scan the barcodes below to change the message length. Refer to
2) for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum
Default = 48.
Minimum Message Length

Plessey Code

Plessey Code
Plessey Message Length
Scan the barcodes below to change the message length. Refer to
2) for additional information. Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum
Default = 48.
Minimum Message Length
<Default All Plessey Code Settings>
Validate Type 10 and Transmit
Message Length Description
Maximum Message Length
Message Length Description
Maximum Message Length
* Off
(page 6-
(page 6-
6 - 23