Chapter 9 - Utilities; To Add A Test Code I.d. Prefix To All Symbologies; Show Decoder Revision; Show Engine Revision - Honeywell 4800dr - Document Camera Barcode Manual

9
Utilities

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the decoded symbology. (See the
Symbology Chart, included in the Appendix A, page A-1) for the single character code that identifies
each symbology.) This action first clears all current prefixes, then programs a Code I.D. prefix for all
symbologies. This is a temporary setting that will be removed when the unit is power cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)

Show Decoder Revision

Scan the barcode below to output the decoder revision.
Show Decoder Revision

Show Engine Revision

Scan the barcode below to output the engine revision. The engine type, revision number, and status
character [ACK] are returned.
Show Engine Revision

Show Scan Driver Revision

Scan the barcode below to output the scan driver revision. The scan driver controls image capture.
Show Scan Driver Revision

Show Software Revision

Scan the barcode below to output the current software revision, unit serial number, and other product
information.
Show Software Revision
9 - 1