UPC-E0
<Default All UPC-E Settings>
UPC-E0
Most U.P.C. barcodes lead with the 0 number system. For these codes, use the UPC-E0 On selection.
If you need to read codes that lead with the 1 number system, use
UPC-E1
(page 6-18). Default = On.
* UPC-E0 On
UPC-E0 Off
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default = Off.
On
* Off
UPC-E0 Addenda Required
When the addenda is Required, the document reader will only read UPC-E barcodes that have
addenda. Default = Not Required.
Required
* Not Required
UPC-E0 Addenda Separator
When this feature is On, there is a space between the data from the barcode and the data from the
addenda. When turned off, there is no space. Default = On.
* On
Off
6 - 17