Using The Remote Control - Sanyo DS20425 Owner's Manual

Owners manual

Hide thumbs

Table of Contents

INSTALL BATTERIES AS SHOWN (2 AAA, not included)

Notes:

–

Do not mix old batteries with new ones or mix different types of

batteries together.

–

Remove the batteries if the remote control will not be used for a

month or more. Weak batteries may leak and cause damage.

(Normal battery life is roughly six months.)

IMPORTANT NOTE: Spent or discharged batteries must be recycled or

disposed properly in compliance with all applicable laws. For detailed

information, contact your local County Solid Waste Authority.

REMOTE CONTROL KEYS

Input Key—Press to select the program source to

watch: TV signal or signal from DVD Player or other

equipment you have connected to the A / V jacks.

Menu Key—Use this key with the L M and – + keys

to navigate and adjust features of the on-screen menu

system. (See pages 10 ~ 12.)

Channel Scanning (CH

(VOL – +) Keys—Press to scan through the chan-

nels in memory and to adjust the volume.

Mute Key—Press once to suppress the volume.

Press again to restore volume to previous level.

Caption Key—(See page 12.)

‘

V-Guide Key—(See pages 13 ~ 14.)

I Be sure batteries are installed correctly.

I Point the remote control toward the TV. Objects between

the remote control may cause misoperation of the remote

control function.

I Cannot select channel with number keys. Press "0" in

front of numbers 1~9. Example: Channel 05.

I Adjusting the volume level: Flashing Right arrow

indicates volume is increasing and flashing Left arrow

indicates volume is decreasing.