Using The Component Video And Audio Input Jacks - Sanyo DS20425 Owner's Manual

USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS

CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
‚
Connect a DVD Player or other equipment's interlaced
Component Video Out to the TV Component Video In
(Y-Pb-Pr) Jacks.
ƒ
Connect the DVD Player's Audio Out to the TV AV2
Audio In (L/R) Jacks.
„
Press POWER to turn on the TV. Turn on external
equipment also.
…
To access Audio Video inputs, press the INPUT key to
select COMPONENT2.
What you will need for connections:
‚
Component video cable – 1
ƒ
Audio Cable – 1
Remote Control
POWER
INPUT RESET
MENU RECALL
…
CH
„
I A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal
is being detected at the Component jacks. Check con-
nection, and turn on external equipment.
6
Need help?
Visit our Web site at
TV Back
AUDIO VIDEO
COMPONENT
2
INPUT 2
Y
P
B
P
R
‚
S-VIDEO
www.sanyoctv.com
or Call
Notes: DVD Player component output must be set to
Interlaced (480i).
Audio / Video Input 2 (AV2) and Component inputs
share the same audio (R/L) input jacks.
Connect equipment to the Component2 video
input or the AV2 video input, but not both types at
the same time.
AUDIO OUT
L R
UHF/VHF/CATV
75Ω
VIDEO
L
ƒ
R
I Press INPUT key after connecting cables to access
the A/V inputs. There is NO need to tune to a blank
channel.
1-800-877-5032
DVD Player
VIDEO OUT
COMPONENT VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
Y P
COAXIAL /C
B B
DIGITAL OUT S-VIDEO OUT
ƒ
P
/C
R R
‚