Rear Panel; Remote Control - Sanyo DS35520OM Owner's Manual

REAR PANEL

Component Video In Jacks
(Component 2) (Y, Pb, Pr)
Connect digital-video external
equipment here (see page 15).
VIDEO AUDIO INPUT
COMPONENT
AUDIO
OUTPUT
L
R
Audio Out Jacks
(Fixed/Variable)
Connect external audio
equipment here (see page 13).
USING THE MULTIMEDIA REMOTE CONTROL
Operates your TV, VCR, Cable Converter Box, DVD, and Satellite Receiver. Simply program
it according to the directions on pages 7~9.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
+
/ signs on the batteries with marks inside the remote
control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
S-Video (Super-Video) AV1 Terminal
To enhance video detail use the S-Video AV1 jack
instead of the AV1 Video jack, if available on your
external video equipment. (S-Video AV1 connec-
tion will override a Video AV1 connection.)
UHF/VHF/CATV
AV2 AV1
75Ω
S-VIDEO
VIDEO
Y
P
(MONO)
b
L L
P
R AUDIO R
r
Audio/Video In Jacks (AV2)
Connect external video equipment here
(see page 14). Also, use the Audio L /R
for component connections.
Cable / Antenna
(VHF/UHF)Terminal
(75 ohms input)
Audio/Video In Jacks (AV1)
Connect external video equipment
here (see page 14).
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
See pages 13 ~ 15
before connecting
external audio/video
equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word
Video1, Video2, or
Component 2
displayed means that
a Video mode is
selected, but no
signal is being
detected at the
Video jacks. Check
connections, and
turn on external
equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want
to operate. Objects
between the remote
control and the equip-
ment may cause
misoperation of the

remote control

function.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
5