Specifications - EAW SMS5 Instruction Manual

6. SPECIFICATIONS

SYSTEM
Freq. Range (–10 dB):
Freq. Response (–3 dB):
Horz. Coverage Angle (–6 dB):
Vert. Coverage Angle (–6 dB):
Directivity Factor; Q (DI):
System Sensitivity
Rated Maximum SPL:
System Nominal Impedance:
Long-term Power Handling
HF Protection:
Crossover:
TRANSDUCERS
Low-Frequency:
High-Frequency:
PHYSICAL
Enclosure:
Attachment Inserts:
Mounting Hardware:
Input Connectors:
Dimensions (HxWxD):
Net Weight:
1 Measured on axis in the far field with 1 watt (2.00 V rms @ 4 ohms) input and referenced to 1 meter distance using the inverse square law. Listed
sound pressure represents an average from 300 Hz to 3 kHz.
2 Long-term maximum input power is determined by submitting the speakers to a power test lasting one hour, in which a special signal (IEC268-1)
is applied 20 times for one minute each, with an interval of two minutes between one application and the next. The special signal is generated by
filtering pink noise with a weighting device that bandpasses the signal with a 12 dB/octave slope below 55 Hz and above 5 kHz, and maintains the
6 dB peak/average ratio. The maximimum power the speaker is able to withstand without sustaining any permanent damage is taken as the value of
long-term maximum input power.
55 Hz–25 kHz
65 Hz–23 kHz
110° averaged 800 Hz to 16 kHz
110° averaged 800 Hz to 16 kHz
6.3 (8.0) averaged 800 Hz to 16 kHz
1
: 87 dB, 1W @ 1m
109.5 dB @ 1m
4Ω
2
175W (IEC268-1)
Dynamic
3.0 kHz, 12 dB/octave
5 in/130 mm carbon fiber woofer
Horn loaded 0.75 in/19 mm dome tweeter, Ferrofluid cooled
45° back angles, high density polystyrene
Four points M6 threaded, two on back, one on top, and one on bottom
Wall-mount ball-joint support bracket
Color: Matte black (SMS5) or white (SMS5W), scratch resistant paint
Grille: Matching perforated steel grille
Gold-plated banana jacks
10.4 in/263 mm x 7.1 in/180 mm x 6.5 in/165 mm
8.6 lb/3.9 kg
5
SMS5 –