Connecting The Power Cord; High-Bandwidth Digital Content Protection (Hdcp) - HP WH344AA User Manual

Connecting the Power Cord

1. Follow all electrical and power warnings
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature. Plug the power cord into a grounded (earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into is easily accessible to the
operator and located as close to the equipment as possible. A power cord should be routed so
that it is not likely to be walked on or pinched by items that are placed upon it or against it.
Do not place anything on power cords or cables. Arrange them so that no one may accidentally
step on or trip over them. Do not pull on a cord or cable.
See Technical Specifications on page 24
2. Connect the round end of the power supply cord to the monitor then connect one end of the
power cord to the power supply and the other end to a grounded electrical outlet.
WARNING!
properly grounded electrical outlet is not available: (1) You should use an electrical outlet
adapter that provides proper grounding. (2) You should have a properly grounded electrical
outlet installed.
Figure 3-6

High-Bandwidth Digital Content Protection (HDCP)

Your monitor supports HDCP and can receive high-definition content. High-definition content is
available in many sources, such as Blu-ray Disc devices or HDTV air or cable broadcasts. If you do
not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when
playing high-definition protected content. Your computer graphics card and monitor must both support
HDCP to display protected content.
10 Chapter 3 Setting Up the Monitor
To reduce the risk of electric shock or damage to your equipment:
To prevent injury from electrical shock, you should do one of the following if a
Connecting the Power Cord
for additional information.
ENWW