Connecting The Dvi-D Video Cable (Not Provided); Connecting The Power Cord - HP 2311gt User Manual

Connecting the DVI-D Video Cable (not provided)

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D
video connector on the computer. You can use this cable only if your computer has a DVI compliant
graphics card that is either integrated or installed. The DVI-D connector and cable are not included
with the monitor.
Figure 3-5

Connecting the Power Cord

1. Follow all electrical and power warnings
WARNING!
Do not disable the power-cord grounding plug. The grounding plug is an important safety
feature. Plug the power cord into a grounded (earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into is easily accessible to the
operator and located as close to the equipment as possible. A power cord should be routed so
that it is not likely to be walked on or pinched by items that are placed on it or against it.
Do not place anything on power cords or cables. Arrange them so that no one might accidentally
step on or trip over them. Do not pull on a cord or cable.
See Technical Specifications on page 34
10 Chapter 3 Setting Up the Monitor
Connecting the DVI-D Cable (cable not provided)
To reduce the risk of electric shock or damage to your equipment:
for additional information.
ENWW