Print Mode - Oki ML3410 Handbook

Print Mode

Print Mode
When you turn your printer on, it is in Print mode. Print mode is the state of
normal operation.
In Print mode, the functions above the basic control buttons are active.
1. SELECT button: Press this button to deselect the printer (SELECT light goes out). Press it a
second time to enable the printer to receive data again (SELECT light goes on).
2. LINE FEED button: Press this button to advance the paper one line at a time.
3. FORM FEED button: Press this button to advance the paper one page at a time.
4. TEAR button: Press this button to advance the paper from the printing position to the tearoff
position. This allows you to tear off a printed page without wasting an extra sheet of paper. See
page 16 for details (
5. PARK button: Press this button to retract continuous forms paper out of the paper path. This
lets you use single sheet paper without removing the continuous forms. See 18 for details (
6. TOP OF FORM button: When the printer is deselected, pressing this button sets the top of form
the point on the page at which printing starts. When you press the FORM FEED button, the new
page advances to this line.
7. MICRO FEED buttons: Pressing these buttons feeds paper up or down in fine increments. If you
hold down the TOP OF FORM button while using the MICRO FEED buttons, the top of form will
automatically be set when you release the buttons.
ML3410 ( 96-02-07 )
).
).